Association between antibiotic pressure and the risk of colonization/infection by multidrug-resistant Acinetobacter baumannii complex: a time series analysis.

OBJECTIVE: To analyze the association between antibiotic pressure and the risk of colonization/infection by Acinetobacter baumannii complex (AB), evaluating both the individual and general prescriptions of antibiotics. METHODS: This is an analytical, observational, case-control study on patients admitted to an Intensive Care Unit (ICU) during an AB outbreak (14 months). A five-year time series was constructed with the monthly incidence of cases of infection/colonization with strains of AB resistant to each antibiotic administered and with the monthly consumption of these antibiotics in the ICU. RESULTS: We identified 40 patients either infected (23) or colonized (17) by AB and 73 controls. We found an epidemic multidrug-resistant clone of AB in 75% of cases. Risk factors associated with the development of AB infection/colonization were: greater use of medical instruments, the presence of a tracheostomy, cutaneous ulcers, surgical lesions and prior antibiotic therapies. The regression analysis of individual use of antibiotics showed that prior treatment with ceftazidime, ceftriaxone, amoxicillin/clavulanate, imipenem, levofloxacin, linezolid, and vancomycin was a risk factor for acquiring AB. ARIMA models showed that the relationship were greatest and statistically significant when the treatment occurred between 6 months (ceftazidime) and 9 months (imipenem and levofloxacin) prior. CONCLUSIONS: The dynamic and aggregate relationship between the incidence of infection/colonization by multidrug-resistant strains of AB and prior antibiotic treatment was statistically significant for intervals of 6 to 9 months.

[Economic evaluation of the Alfred 60/AST device implantation for bacterial growth detection with automatic sewing machine]. / Evaluación económica de la implantación del autoanalizador Alfred 60/AST de detección de crecimiento bacteriano con sembrador automático.

OBJECTIVE: It is becoming increasingly necessary to automatize screening of urine samples to culture at Microbiology laboratories. Our objective was to estimate the budget threshold from which the Alfred 60/AST device would be profitable for our hospital. METHODS: Cost minimization study by decision trees, carried out in a General Hospital. The cost of traditional urine culture and urine processing using Alfred-60/AST were compared. Traditional processing involves the culture of all urine specimens received onto blood and MacConkey agar, and identification of every microorganism isolated by Vitek-2 system. The autoanalyzer would only inoculate the positive urines onto a chromogenic media, directly identifying the Escherichia coli isolates. RESULTS: The variables with the greatest economic impact in the model were the probability of obtaining a positive culture, the prevalence of E. coli in the urine cultures and the cost per sample using Alfred-60/AST. The multivariate sensitivity analysis showed that the model was solid. The bivariate sensitivity analysis showed that the model is suceptible to cost modification, mainly of the automatic device. At a threshold value of 1.40 euros/determination, the automatic processing would decrease the annual costs in 2,879 euros. CONCLUSIONS: The introduction of the Alfred-60/AST device in our laboratory at 1.40 euros/determination would reduce urine processing workload, saving time and costs.

[Monoclonal spread of multi-drug resistant CTX-M-15-producing Klebsiella pneumoniae. Impact of measures to control the outbreak]. / Diseminación monoclonal de Klebsiella pneumoniae productora de CTX-M-15 multirresistente. Impacto de las medidas para controlar el brote.

OBJECTIVE: To describe an outbreak of multi-drug resistant extended-spectrum ß-lactamases-producing Klebsiella pneumoniae (MDR-ESBL-KPN) and the impact of measures for its control. METHODS: We reviewed the patients´ clinical records with MDR-ESBL-KPN isolation during 2013-2016 with resistance to fluoroquinolones, aminoglycosides, fosfomycin, and nitrofurantoin; susceptible to imipenem, meropenem, colistin, and tigecycline and variable to ertapenem and cotrimoxazole (Vitek-2). The genetic relationship between 35 isolates was established by PFGE and MLST. Control measures were put in place in January 2016. RESULTS: We detected 269 patients colonized and/or infected by KPN-ESBL-MDR with a common resistance phenotype; the strains studied carried the blaCTX-M-15 gene and formed a single cluster belonging to ST11. The outbreak was detected at the end of 2015, although it began in 2013 in an elderly center. The acquisition source of the strains was: 6% community-acquired, 37% hospital-acquired (76% in internal medicine) and 57% related to long health care facilities (78% of hospitalizations in the last year). Ninety-four percent of patients had at least one underlying disease, 90% received antibiotics previously and 49% had some invasive devices. After the introduction of control measures, the incidence of cases in the quarter was reduced from 29 to 15. CONCLUSIONS: We detected a monoclonal outbreak of MDR-CTX-M-15-KPN in 2015, with predominance of health-care associated cases. The success in the rapid spread of the outbreak was due to the delay in its detection and to the fact that most of the patients had previously received antibiotics. The control measures reduced the number of isolates by 50%.

[Results of the implementation of an Antimicrobial Stewardship Program in the "Gerencia de Atención Integrada" of Alcazar de San Juan (Castilla La Mancha)]. / Resultados de la implantación de un Programa de Optimización de Antimicrobianos en la Gerencia de Atención Integrada de Alcázar de San Juan (Castilla La Mancha).

OBJECTIVE: Our aim was to evaluate the efficiency of an ASP after its implementation in 2016 in a Spanish hospital quality system. METHODS: Efficiency of the ASP was measured by process and outcome indicators at the level of the patient's quality of life, antimicrobial consumption and percentage of resistance to them during the 2016-2017 period. In 2017, the failures mode and effects analysis (FMEA) methodology was applied. An annual satisfaction survey was conducted. RESULTS: The clinical indicators were within the threshold of acceptability, as well as the empirical prescription of antimicrobials, the consumption of antibiotics (reduction of 77 DDD in the first semester of 2016 to 26 in the second semester of 2017) and the renal (gentamicin) and neurological (carbapenems) toxicity. The FMEA identified as a main risk the lack of adequacy of the empirical treatment once the antibiogram was obtained; thus, a corrective action was taken in 2017. Regarding the microbiological indicators, the incidence of multi-drug resistant and carbapenemase-producing enterobacteria, and that of methicillin-resistant Staphylococcus aureus, were reduced. Eighty-three percent of the counselling activities carried out were accepted. The surveys revealed a good acceptance and spread of the program, the need for protocols and training in the use of antibiotics. CONCLUSIONS: The implementation of the ASP in the quality system was efficient. The consumption of antibiotics and the adverse effects derived from their use were reduced, improving the quality of life of patients, and reducing health costs.

PEGylated PLGA nanospheres optimized by design of experiments for ocular administration of dexibuprofen-in vitro, ex vivo and in vivo characterization.

Dexibuprofen-loaded PEGylated PLGA nanospheres have been developed to improve the biopharmaceutical profile of the anti-inflammatory drug for ocular administration. Dexibuprofen is the active enantiomer of ibuprofen and therefore lower doses may be applied to achieve the same therapeutic level. According to this, two batches of nanospheres of different drug concentrations, 0.5 and 1.0mg/ml respectively, have been developed (the latter corresponding to the therapeutic ibuprofen concentration for inflammatory eye diseases). Both batches were composed of negatively charged nanospheres (--14.1 and --15.9mV), with a mean particle size below 200nm, and a high encapsulation efficiency (99%). X-ray, FTIR, and DSC analyses confirmed that the drug was dispersed inside the matrix of the nanospheres. While the in vitro release profile was sustained up to 12h, the ex vivo corneal and scleral permeation profile demonstrated higher drug retention and permeation in the corneal tissue rather than in the sclera. These results were also confirmed by the quantification of dexibuprofen in ocular tissues after the in vivo administration of drug-loaded nanospheres. Cell viability studies confirmed that PEGylated-PLGA nanospheres were less cytotoxic than free dexibuprofen in the majority of the tested concentrations. Ocular in vitro (HET-CAM test) and in vivo (Draize test) tolerance assays demonstrated the non-irritant character of both nanosphere batches. In vivo anti-inflammatory effects were evaluated in albino rabbits before and after inflammation induction. Both batches confirmed to be effective to treat and prevent ocular inflammation.

Permeation studies through porcine small intestine of furosemide solutions for personalised paediatric administration.

Personalized medicine is a challenging research area in paediatric drug design since no suitable pharmaceutical forms are currently available. Furosemide is an anthranilic acid derivative used in paediatric practice to treat cardiac and pulmonary disorders in premature infants and neonates. However, it is not commercialized in suitable dosage forms for paediatrics. Elaborating new paediatric formulations when no commercial forms are available is a common practice in pharmacy laboratories; amongst these, oral liquid formulations are the most common. We developed two extemporaneous paediatric oral solutions of furosemide (pure powder). The characterization and stability study were also performed. Parameters such as organoleptic characteristics, rheology, pH, content of active substance, and microbial stability were evaluated at three temperatures for two months. Evaluation of all these parameters showed that both solutions were stable for 60 days at 4 and 25 °C. Moreover, ex vivo studies were performed to evaluate the permeation behaviour of developed solutions through porcine small intestine to evaluate the potential paediatric biological parameters influencing the bioavailability and efficacy. A validated spectrofluorometric method was also used for this purpose. Our results guarantee a correct dosification, administration and potential efficacy of furosemide when is formulated in liquid oral forms for the treatment of cardiac and pulmonary disorders in children.

A novel lipid nanocarrier for insulin delivery: production, characterization and toxicity testing.

A novel nanocarrier based on solid lipid nanoparticles (SLNs) was developed for insulin delivery using a novel double emulsion method. Physical stability of particles was assessed by size analysis using dynamic light scattering (DLS), matrix crystallinity by differential scanning calorimetry (DSC) and toxicity analysis by Drosophila melanogaster testing. Insulin-SLNs were composed of Softisan®100 1.25% wt, Lutrol®F68 1% wt, soybean lecithin 0.125% wt, and loaded with 0.73-0.58 mg/mL peptide. Placebo-SLNs (insulin-free) also contained 0.025% wt Tween®80. Mean particle sizes of placebo-SLN and insulin-SLN were 958 ± 9.5 and 978 ± 8.3 nm, respectively. The polydispersity index (PI) was 0.28 ± 0.018 and 0.29 ± 0.013, respectively. Polarized light microscopy analysis depicted no aggregation of developed particles. DSC analysis allowed characterizing SLN with 43-51% matrix crystallinity. Using Drosophila melanogaster test, no toxicity was reported for SLN and for the bulk lipid. This study shows that SLNs are promising and helpful to overcome conventional insulin therapy, in particular for their lack of toxicity for oral delivery.

Preparation, characterization and biocompatibility studies on risperidone-loaded solid lipid nanoparticles (SLN): high pressure homogenization versus ultrasound.

The suitability of solid lipid nanoparticles (SLN) for the encapsulation of risperidone (RISP), an antipsychotic lipophilic drug, was assessed for oral administration. The hot high pressure homogenization (HPH) and the ultrasound (US) technique were used as production methods for SLN. All the studies on the SLN formulations were done in parallel, in order to compare the results and conclude about the advantages and limitations of both techniques. The particle sizes were in the nanometer range for all prepared SLN formulations and the zeta potential absolute values were high, predicting good long-term stability. Optical analyses demonstrated the achievement of stable colloidal dispersions. Physicochemical characterization of dispersions and bulk lipids, performed by differential scanning calorimetry (DSC) and X-ray assays, support prediction of occurrence of drug incorporation in the SLN and good long term stability of the systems. The toxicity of SLN with Caco-2 cells and the existence of contaminations derived from the production equipments were assessed by the (4,5-dimethylthiazol-2-yl)2,5-diphenyl-tetrazolium bromide (MTT) assay. The results showed 90% of cell viability after SLN exposure, with no significant differences within all prepared formulations (p > 0.05). From this study, we conclude that SLN can be considered as efficient carriers for RISP encapsulation. Moreover, HPH and US revealed to be both effective methods for SLN production.

Optimizing flurbiprofen-loaded NLC by central composite factorial design for ocular delivery.

The purpose of this study was to design and optimize a new topical delivery system for ocular administration of flurbiprofen (FB), based on lipid nanoparticles. These particles, called nanostructured lipid carriers (NLC), were composed of a fatty acid (stearic acid (SA)) as the solid lipid and a mixture of Miglyol(®) 812 and castor oil (CO) as the liquid lipids, prepared by the hot high pressure homogenization method. After selecting the critical variables influencing the physicochemical characteristics of the NLC (the liquid lipid (i.e. oil) concentration with respect to the total lipid (cOil/L (wt%)), the surfactant and the flurbiprofen concentration, on particle size, polydispersity index and encapsulation efficiency), a three-factor five-level central rotatable composite design was employed to plan and perform the experiments. Morphological examination, crystallinity and stability studies were also performed to accomplish the optimization study. The results showed that increasing cOil/L (wt%) was followed by an enhanced tendency to produce smaller particles, but the liquid to solid lipid proportion should not exceed 30 wt% due to destabilization problems. Therefore, a 70:30 ratio of SA to oil (miglyol + CO) was selected to develop an optimal NLC formulation. The smaller particles obtained when increasing surfactant concentration led to the selection of 3.2 wt% of Tween(®) 80 (non-ionic surfactant). The positive effect of the increase in FB concentration on the encapsulation efficiency (EE) and its total solubilization in the lipid matrix led to the selection of 0.25 wt% of FB in the formulation. The optimal NLC showed an appropriate average size for ophthalmic administration (228.3 nm) with a narrow size distribution (0.156), negatively charged surface (-33.3 mV) and high EE (∼90%). The in vitro experiments proved that sustained release FB was achieved using NLC as drug carriers. Optimal NLC formulation did not show toxicity on ocular tissues.

Potential use of nanostructured lipid carriers for topical delivery of flurbiprofen.

The potential use of nanostructured lipid carriers (NLC) composed of a fatty acid [stearic acid (SA)] or a triglyceride (glyceryl behenate) as solid lipids, and a mixture of medium chain triglycerides and castor oil as liquid lipids, for skin administration of flurbiprofen (FB), has been explored. Two different optimized NLC formulations (FB-SANLC based on SA vs. FB-C888NLC based on glyceryl behenate), with respect to the morphometrical properties (particle size and polydispersity index) and the entrapment efficiency, were used in this study. The ex vivo permeation profiles of FB-C888NLC, FB-SANLC and conventional FB solution were evaluated using human skin. An improved FB permeation was observed when the drug was delivered by skin application of FB-C888NLC, attributed to the particle size and matrix crystallinity. The differential scanning calorimetry and X-ray diffraction studies suggested major polymorphic transitions in the lipid matrix of FB-C888NLC. A good correlation between polymorphic transitions and increased drug permeation was observed. However, both NLC dispersions showed a penetration-enhancing ratio (ER) higher than conventional FB solution. The in vitro and in vivo irritancy and local tolerability were assessed by running, respectively, the SKINTEX™ and Draize test. Both FB-C888NLC and FB-SANLC were classified as nonirritant.

Design and ocular tolerance of flurbiprofen loaded ultrasound-engineered NLC.

Packaging small drug molecules, such as non-steroidal anti-inflammatory drugs (NSAIDs) into nanoparticulate systems has been reported as a promising approach to improve the drug's bioavailability, biocompatibility and safety profiles. In the last 20 years, lipid nanoparticles (lipid dispersions) entered the nanoparticulate library as novel carrier systems due to their great potential as an alternative to other systems such as polymeric nanoparticles and liposomes for several administration routes. For ocular instillation nanoparticulate carriers are required to have a low mean particle size, with the lowest polydispersity as possible. The purpose of this work was to study the combined influence of 2-level, 4-factor variables on the formulation of flurbiprofen (FB), a lipophilic NSAID, in lipid carriers currently named as nanostructured lipid carriers (NLC). NLC were produced with stearic acid (SA) and castor oil (CO) stabilized by Tween® 80 (non-ionic surfactant) in aqueous dispersion. A 2(4) full factorial design based on 4 independent variables was used to plan the experiments, namely, the percentage of SA with regard to the total lipid, the FB concentration, the stabilizer concentration, and the storage conditions (i.e., storage temperature). The effects of these parameters on the mean particle size, polydispersity index (PI) and zeta potential (ZP) were investigated as dependent variables. The optimization process was achieved and the best formulation corresponded to the NLC formulation composed of 0.05 (wt%) FB, 1.6 (wt%) Tween® 80 and a 50:50 ratio of SA to CO, with an average diameter of 288 nm, PI 0.245 of and ZP of -29 mV. This factorial design study has proven to be a useful tool in optimizing FB-loaded NLC formulations. Stability of the optimized NLC was predicted using a TurbiScanLab® and the ocular tolerance was assessed in vitro and in vivo by the Eytex® and Draize test, respectively. The developed systems were shown physico-chemically stable with high tolerance for eye instillation.

Optimization and physicochemical characterization of a triamcinolone acetonide-loaded NLC for ocular antiangiogenic applications.

The purpose of this study was to develop a novel nanostructured lipid carrier (NLC) for the intravitreal-targeting delivery of triamcinolone acetonide (TA) by direct ocular instillation. A five-level central composite rotable design was used to study the influence of four different variables on the physicochemical characteristics of NLCs. The analysis of variance (ANOVA) statistical test was used to assess the optimization of NLC production parameters. The systems were produced by high pressure homogenization using Precirol ATO5 and squalene as solid and liquid lipids respectively, and Lutrol F68 as surfactant. Homogenization at 600 bar for 3 cycles of the optimized formulation resulted in the production of small NLC (mean diameter < 200 nm) with a homogeneous particle size distribution (polydispersity index (PI) approximately 0.1), of negatively charged surface (approximately |45| mV) and high entrapment efficiency (approximately 95%). Surface morphology was assessed by SEM which revealed fairly spherical shape. DSC, WAXS and FT-IR analyses confirmed that TA was mostly entrapped into the NLC, characterized by an amorphous matrix. In vivo Draize test showed no signs of ocular toxicity.

Methyl trypsin loaded poly(D,L-lactide-coglycolide) nanoparticles for contact lens care.

The need of an enzymatic cleaner for soft contact lens care with an improved ocular safety and stability profile led us to evaluate the use of nanoparticles (NPs) of poly(D,L-lactide-coglycolide) (PLGA) and methyl trypsin (MT). NPs were prepared by double emulsion-solvent evaporation technique. A factorial design was performed to select the lactic acid proportion in the copolymer and conditions of the second sonication. The increment in proportion of lactic acid provided higher particle size results. When the time of second sonication was decreased, the entrapment efficiency (EE) increased. PLGA 50:50 NPs were chosen for further development since PLGA 50:50H NPs settled fast with different particle size in the sediment and PLGA 75:25 NPs led to form aggregates. The addition of glycerol to the NPs provided the highest EE of MT (>90%) while the addition of Tetronic 1304 promoted the fast release of enzyme initially and decreased the zeta potential (zeta) up to neutral values after gamma irradiation. NPs are expected to be effective as a lens care cleaner after 3 days or even longer with a very low quantity of enzyme released. Formulations showed an acceptable irritation ocular tolerance after in vitro HET-CAM test and in vivo Draize test.

Effect of polymer viscosity on physicochemical properties and ocular tolerance of FB-loaded PLGA nanospheres.

Poly(lactide-co-glycolide) acid (PLGA) nanospheres incorporating flurbiprofen (FB) were produced by the solvent displacement technique, for ocular applications aiming to avoid/minimize inflammation induced by surgical trauma. In this work, a PLGA of low viscosity has been tested and the results obtained were compared with those previously reported by Vega et al. The physicochemical properties of the developed formulations were evaluated by measuring particle size, zeta potential and FB entrapment efficiency, showing no significant differences. Release studies demonstrated that the formulation produced with PLGA of higher viscosity revealed a slower drug release rate. Stability analysis, for a period of 75 days, was performed using three complementary methods: (i) turbidity experiments using a Turbiscan optical analyzer, (ii) particle size measurements, and (iii) zeta potential analysis. The results revealed long-term physicochemical stability suitability for ophthalmic use, being independent from the polymer viscosity. The ocular tolerance was assessed by an alternative in vitro method to animal experimentation, the HET-CAM. For all developed formulations no ocular irritancy has been detected.

Validation of a device for transcorneal drug permeation measure.

A model of a corneal apparatus for the study of drug permeation across the corneal tissues is evaluated. The instrument was designed to measure drug transport in living rabbit corneas, which are placed hermetically into a chamber, separating it into two compartments (epithelial and endothelial). The device also allows the measurement and recording of the corneal potential, providing information on the vitality of the cornea. The validation of the instrument was carried out by introducing variable amounts of fluorescein into the epithelial compartment of the chamber, and measuring the concentration of the dye by the fluorescence obtained in the endothelial compartment. The fluorescein concentration in the endothelial compartment increased exponentially over time, with a good correlation between the epithelial and endothelial concentrations. The repeatability of the measurements is strongly influenced by the maintenance and regularity of the initial concentration, the time that has passed from the beginning of the experiment, and the corneal potential (vitality of the cornea). Less important are slight modifications to temperature, the agitation system and hydrostatic pressure (robustness). The proposed experimental system shows good precision when measuring the permeation through rabbit cornea at different drug concentrations, and good repeatability and intermediate precision with non-significant differences among operators in repeated experiments. It is a good approach for comparing corneal transport of different formulations of the same drug. To test the method with real samples, different formulations of the NSAID sodium diclofenac where assayed. Corneal permeation was remarkably enhanced when diclofenac was formulated as a beta-cyclodextrin complex. Other additives, such as the surfactants used in commercial eye drops, also enhanced corneal drug transport.

PLGA nanospheres for the ocular delivery of flurbiprofen: drug release and interactions.

Poly(D,L-lactide-co-glycolide) nanospheres incorporating flurbiprofen were prepared by the solvent displacement technique for purposes of assessing (i) drug-polymer physicochemical interactions, (ii) flurbiprofen release from the polymer matrix and (iii) eye permeation of the drug formulated in the colloidal system. The resulting nanospheres were on average 200-300 nm in size and bore a negative charge (xi-potential around -25 mV). They were shown by atomic force microscopy and transmission electron microscopy to be spherical and regular in shape. Thermal methods, infrared spectroscopy and X-ray diffraction showed that the drug was dispersed inside the particles. These tests evidenced an eutectic mixture meaning more widespread dispersion of the drug in the polymer system. Entrapped flurbiprofen was released in vitro from the polymer system by dissolution and diffusion in high drug loaded nanospheres, whereas those with a lesser load showed only diffusion. The ex vivo corneal permeation study showed that flurbiprofen-loaded nanospheres enhanced drug penetration by about twofold over commercial eye drops containing poly(vinyl alcohol) and by about fourfold over flurbiprofen in pH 7.4 phosphate buffer. The corneal hydration level of each cornea was determined to evaluate potential corneal damage.

Transcorneal permeation in a corneal device of non-steroidal anti-inflammatory drugs in drug delivery systems.

This work is focused on the ex vivo study of corneal permeation of two anti-inflammatory drugs: diclofenac, and flurbiprofen (as a model of hydrophilic and lipophilic drug, respectively) loaded to cyclodextrins or polymeric nanoparticles in order to determine differences in their corneal permeation against free drug or commercial eye drops. These studies were carried out in a corneal device designed and developed in our laboratory. In this work the habitual conditions for the permeation studies were modified to reproduce the behaviour when eye drops were administered. For this reason a new tetracompartmental pharmacokinetic model was developed. The complex formation of diclofenac with cyclodextrins and the flurbiprofen loaded to polymeric nanoparticles has been shown as effective procedures to remarkably increase the bioavailability of the anti-inflammatory drugs. The efficiency of polymeric nanoparticles of Poly (D-L lactic-coglycolyc) acid and poly-epsilon-caprolacton as intraocular targeting of NSAIDs has also been proved, being the latter polymer more effective to increase the flurbiprofen corneal permeation. The apparent corneal permeability coefficient of samples has been calculated getting a low permeation values for free drugs.

Flurbiprofen loaded biodegradable nanoparticles for ophtalmic administration.

Poly(lactic/glycolic) acid nanoparticles incorporating flurbiprofen (FB) were prepared by the solvent displacement technique using poloxamer 188 as a stabilizer to improve the availability of the drug for the prevention of the inflammation caused by ocular surgery. A 2(3) + star design was applied to investigate the influence of several factors such as the pH of the aqueous phase, the initial concentration of the stabilizer, and the drug used to prepare the nanoparticles (NPs) on the physicochemical properties (particle size analysis, zeta potential, and drug loading efficiency) of the colloidal system. The best formulations were those prepared at pH 3.5 with a concentration of 1.5 mg/mL of FB and 10 or 20 mg/mL of poloxamer 188. These formulations showed an appropriate average size for ophthalmic administration (232.8 and 277.6 nm, respectively) and a good yield of entrapment efficiency (94.60% and 93.55%, respectively). The release behavior of FB from the developed NPs was complete and exhibited a biphasic pattern. Formulations did not show toxicity on ocular tissues. In vivo anti-inflammatory efficacy was assessed in the rabbit eye after topical instillation of sodium arachidonate (SA). A higher decrease of the SA-induced inflammation was obtained for the NP formulations.

Spectroscopic techniques applied to the study of laminin fragments inserted into model membranes.

The influence of four laminin-derived peptides on bilayer organization is studied. Spectroscopic methods applied were based on pyrene fluorescence properties (quenching, I1/I3, and monomer/excimer equilibrium), asymmetric membrane fluorescence (NBD-PE/dithionite), and polarization fluorescence (TMA-DPH). Also, the ability of these peptides to release carboxyfluorescein entrapped in vesicles was determined. Results suggest that these peptides do not noticeably modify the packing and motion of lipids (in the gel state), but coat its surface, preventing penetration of quenchers and chemical reactants. Nevertheless, their presence promotes a soft release of entrapped CF after incubation at 37 degrees C.